{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Micro copying insert, internal, right-hand, L1 = 16 mm, ⌀ Dmin: 4,2mm
Article no.: 270272 4,2
Article code:
Product details
Technical Data
| Series | Micro | |
| Minimum ⌀ Dmin | 4.2 mm | |
| Overhang L1 | 16 mm | |
| Shank ⌀ d | 4 mm | |
| Tip centre offset L3 | 1.95 mm | |
| maximum cutting depth tmax | 0.75 mm | |
| Radius R | 0.15 mm | |
| Feed f in steel < 1100 N/mm2 | 0.05 mm/rev. | |
| Feed f in stainless steel < 900 N/mm2 | 0.05 mm/rev. | |
| Feed f in stainless steel > 900 N/mm2 | 0.05 mm/rev. | |
| Type of product | Cutter insert for turning |
Identification numbers & Classifications
| Article number | 270272 4,2 | |
| EAN / GTIN | 4045197466495 | |
| Manufacturer number | 270272 4,2 |
Application Table
N
250
N
200
N
200
P
160
P
150
P
150
P
80
P
60
H
30
M
90
M
60
S
30
K
90
N
150
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Micro copying insert, internal, right-hand, L1 = 16 mm, ⌀ Dmin: 4,2mm |
||||||
| Radius R | 0.15 mm | 0.15 mm | 0.15 mm | 0.15 mm | 0.15 mm | 0.15 mm |
| Shank ⌀ d | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm |
| Type of product | Cutter insert for turning | Cutter insert for turning | Cutter insert for turning | Cutter insert for turning | Cutter insert for turning | Cutter insert for turning |