{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Number of cutting edges Z | 2 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Plunging; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 10 mm | |
Overhang L1 | 26 mm | |
Overall length Ltot | 100 mm | |
Shank ⌀ Ds h6 | 16 mm | |
suitable indexable insert | LOMU.. | |
Indexable insert size | 10 | |
Insert screw | 229713 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 225200 16/2 | |
EAN / GTIN | 4960664648061 | |
Manufacturer number | THN05003 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Indexable milling cutter 90° MEW 16/2 mm |
|||
Number of cutting edges Z | 2 | 2 | 2 |
Milling application | Plunging; End milling | End milling; Circular milling; Ramping | Corner milling |
Overall length Ltot | 100 mm | 140 mm | 90 mm |
suitable indexable insert | LOMU.. | AP.. 1335.. | LO.U0904.. |
Shank type | Plain shank | Plain shank | Plain shank |
Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm |
Type of product | End / face mill | End / face mill | End / face mill |