{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
MFH Harrier high feed rate milling cutter with plain shank, for indexable inserts SO.., ⌀ D / number of teeth Z: 28/2mm
Article no.: 222050 28/2
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 28 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 11 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 140 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 39 mm | |
| Circular interpolation milling ⌀ Dmax | 54 mm | |
| Ramping angle αmax | 1.98 degrees | |
| Ramping length L for αmax | 10.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification & Classification
| Article number | 222050 28/2 | |
| EAN / GTIN | 4960664707461 | |
| Manufacturer number | THN07611 | |
| Manufacturer | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 NEUSS, Germany, www.kyocera-unimerco.de |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.