{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 18 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | H | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | no | |
Flute length Lc | 36 mm | |
Overhang length L1 incl. recess | 45 mm | |
Recess ⌀ D1 | 17.8 mm | |
Overall length L | 100 mm | |
Shank ⌀ Ds | 18 mm | |
Shank form | HB | |
Corner chamfer width at 45° | 0.18 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.08 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.1 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202720 18 | |
EAN / GTIN | 4045197117960 | |
Manufacturer number | 202720 18 |
This article |
Recommendations |
|||
---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ e8 DC: 18mm |
||||
Coating | TiAlN | TiSi | AlCrN | TiAlN |
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Recess ⌀ D1 | 17.8 mm | 17.5 mm | 17.5 mm | 17.5 mm |
Overall length L | 100 mm | 104 mm | 92 mm | 117 mm |
Cutting edge ⌀ DC | 18 mm | 18 mm | 18 mm | 18 mm |
Flute length Lc | 36 mm | 36 mm | 36 mm | 36 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill |