{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill MTC, with threaded shank, ⌀ D / number of teeth Z: 10/2mm
Article no.: 215615 10/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 10 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 20 mm | |
| ⌀ D1 h6 | 6.5 mm | |
| ⌀ D2 | 9.4 mm | |
| Mounting thread M | M6 | |
| ⌀ D3 | 8 mm | |
| Circular interpolation milling ⌀ Dmin | 18 mm | |
| Circular interpolation milling ⌀ Dmax | 18 mm | |
| Circular interpolation milling ap | 0.7 mm | |
| Ramping angle αmax | 1.67 degrees | |
| Ramping length L for αmax | 6.85 mm | |
| suitable indexable insert | AP.. 0602.. | |
| Pack of insert screws | 219827 (6IP; 0.45 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215615 10/2 | |
| EAN / GTIN | 4045197601841 | |
| Manufacturer number | 215615 10/2 |
Description
Udførelse:
Præcisionshjørnefræser med ulige deling for at opnå en rolig drift, en optimal præcision og skæreeffekt. Den nye generation af high-performance vendeplattehjørnefræsere med skærekraftreduceret geometri til brug ved MTC-skæring ved ustabile forhold eller til spindler med lav dreveffekt.
Anvendelse:
Til hjørnefræsning med store dyber, også i hel længde. Universalbrug til alle stålmaterialer, også rust- og syrefast stål.
Reservedel:
Vendeplatteskruesæt nr. 219827 (6IP; 0,45 Nm).