{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Artikkelnr.: 250371 CA125P
CNMG 120408, Sort: CA025P
Article no.: 250371 CA025P
Artikkelkode:
Produktinformasjon
Technical Data
| ISO code indexable insert | CNMG 120408 | |
| Corner radius | 0.8 mm | |
| Grade | CA025P | |
| Tool material | VHM | |
| Coating | CVD | |
| Main application | P | |
| Cutting conditions | snitt intermittent | |
| Chip breaker | PH | |
| Cutting depth ap | 1 mm - 10 mm | |
| Feed f | 0.25 mm/rev. - 0.8 mm/rev. | |
| Skärhastighet vc primär användning | 70 m/min - 420 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Finbearbetning | |
| Produktslag | Vändskär för svarvning |
Identification numbers & Classifications
| Artikkelkode | 250371 CA025P | |
| Manufacturer number | TMH00124 |
Användningstabell
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
CNMG 120408, Sort: CA025P |
on request
På lager
3 069 styck i lager
fra
1
Arbeidsstykker
€10.68
plus VAT at the current rate
Prices plus delivery costs
fra
10
Arbeidsstykker
€8.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
1 672 styck i lager
€6.45
plus VAT at the current rate
Prices plus delivery costs
|
|
| ISO code indexable insert | CNMG 120408 | CNMG 120408 | CNMG 120404 |
| Finishing/roughing assignment | Finbearbetning | Roughing | Roughing |
| Cutting depth ap | 1 mm - 10 mm | 1.5 mm - 8 mm | 1.8 mm - 6 mm |
| Feed f | 0.25 mm/rev. - 0.8 mm/rev. | 0.25 mm/rev. - 0.6 mm/rev. | 0.2 mm/rev. - 0.6 mm/rev. |
| Main application | P | P | P |
| Skärhastighet vc primär användning | 70 m/min - 420 m/min | 100 m/min - 300 m/min | 80 m/min - 260 m/min |
| Produktslag | Vändskär för svarvning | Indexable insert for turning | Indexable insert for turning |