{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DCMW 11T302, KBN25M, Type: MET
Article no.: 265682 MET
Article code:
Product details
Technical Data
| ISO code indexable insert | DCMW 11T302 | |
| Corner radius | 0.2 mm | |
| Grade | KBN25M | |
| Tool material | CBN | |
| Cutting conditions | slightly interrupted | |
| Cutting edge version | MET | |
| Cutting depth ap | 0.05 mm - 0.5 mm | |
| Feed f | 0.1 mm/rev. - 0.2 mm/rev. | |
| Cutting speed vc main application | 100 m/min - 180 m/min | |
| Number of changes/inserts | 2 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 265682 MET | |
| EAN / GTIN | 4960664529216 | |
| Manufacturer number | TBZ02125 |
Application Table
H
H
H
Description
Version:
MEGACOAT coated CBN inserts.
MultiEdge Tough; 2 cutting edges per insert, with special honing for optimisation of interrupted cutting.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DCMW 11T302, KBN25M, Type: MET
on request
In stock
16 pieces in stock
€79.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
€24.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
€24.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
178 pieces in stock
€61.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
253 pieces in stock
€61.80
plus VAT at the current rate
Prices plus delivery costs
|
|
| Finishing/roughing assignment | Finishing | Finishing | Finishing | Finishing | Finishing |
| Cutting edge version | MET | M | M | G | G |
| Tool material | CBN | CBN | CBN | CBN | CBN |
| Cutting conditions | slightly interrupted | continuous | continuous | continuous; heavily interrupted; slightly interrupted | continuous; heavily interrupted; slightly interrupted |
| Cutting depth ap | 0.05 mm - 0.5 mm | 0.1 mm - 0.5 mm | 0.1 mm - 0.5 mm | 0.03 mm - 0.12 mm | 0.03 mm - 0.12 mm |
| Feed f | 0.1 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.2 mm/rev. | 0.04 mm/rev. - 0.12 mm/rev. | 0.04 mm/rev. - 0.12 mm/rev. |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |