{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
SNMG 120404 HB7020
Article no.: 251222 HB7020
Article code:
Product details
Technical Data
| ISO code indexable insert | SNMG 120404 | |
| Corner radius | 0.4 mm | |
| Grade | HB7020 | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | SM | |
| Cutting depth ap | 0.5 mm - 6 mm | |
| Feed f | 0.15 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 120 m/min - 350 m/min | |
| Number of changes/inserts | 8 | |
| Finishing/roughing assignment | Semi-roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 251222 HB7020 | |
| EAN / GTIN | 4045197699565 | |
| Manufacturer number | 251222 HB7020 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
SNMG 120404 HB7020
on request
In stock
558 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
599 pieces in stock
6,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
514 pieces in stock
6,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
316 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 8 | 8 | 8 | 8 |
| Corner radius | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm |
| Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Chip breaker | SM | MM | PM | VM |
| Feed f | 0.15 mm/rev. - 0.5 mm/rev. | 0.12 mm/rev. - 0.45 mm/rev. | 0.1 mm/rev. - 0.45 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. |
| Main application | P | M | P | M |