{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM plain shank thread mill with countersink 2×D, TiAlN, G: G1/16
Article no.: 139715 G1/16
Copy
Article code:
Copy
- Thread type: G; G-LH
- Flank angle: 55
- Tool material: Solid carbide
- Shank: DIN 6535 HA to h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master TM | |
| Thread size | G1/16 | |
| Coating | TiAlN | |
| Thread type | G; G-LH | |
| Flank angle | 55 degrees | |
| Tool material | Solid carbide | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 0.91 mm | |
| Threads per inch | 28 | |
| Nominal ⌀ DC | 6.2 mm | |
| Flute length Lc | 15.87 mm | |
| Shank length Ls | 40 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 10 mm | |
| Neck ⌀ D1 | 8.3 mm | |
| Programming value for countersink L1 | 16.88 mm | |
| No. of teeth Z | 4 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| For use with external threads | up to 2×D for bolt threads | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Feed fz in steel < 750 N/mm2 | 0.06 mm | |
| Thread profile | Full profile | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 15.87 mm | |
| Type of product | thread milling cutter |
Identification & Classification
| Article number |
139715 G1/16
Copy |
|
| EAN / GTIN |
4045197956934
Copy |
|
| Manufacturer number |
139715 G1/16
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
220
suitable for / [m/min]
N
ISO code:
220
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
P
ISO code:
140
suitable for / [m/min]
P
ISO code:
130
suitable for / [m/min]
P
ISO code:
120
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
H
ISO code:
45
suitable for / [m/min]
H
ISO code:
85
suitable for / [m/min]
H
ISO code:
50
suitable for / [m/min]
M
ISO code:
82
suitable for / [m/min]
M
ISO code:
75
suitable for / [m/min]
S
ISO code:
50
suitable for / [m/min]
K
ISO code:
120
suitable for / [m/min]
N
ISO code:
200
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connections). Suitable for internal and external threads.