{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
VBMW 160408, BUX220, Cutting edge version: M
Article no.: 265780 M
Article code:
Product details
Technical Data
| ISO code indexable insert | VBMW 160408 | |
| Corner radius | 0.8 mm | |
| Grade | BUX220 | |
| Tool material | CBN | |
| Cutting conditions | continuous | |
| Cutting edge version | M | |
| Cutting depth ap | 0.1 mm - 0.5 mm | |
| Feed f | 0.1 mm/rev. - 0.2 mm/rev. | |
| Cutting speed vc main application | 80 m/min - 200 m/min | |
| Number of changes/inserts | 1 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 265780 M | |
| EAN / GTIN | 4045197818171 | |
| Manufacturer number | 265780 M |
Application Table
H
H
Description
Version:
- Disposable insert.
- Single cutting edge.
Note:
Further indexable insert shapes, sizes and corner radii available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
VBMW 160408, BUX220, Cutting edge version: M |
||||||
| Number of changes/inserts | 1 | 1 | 1 | 2 | 2 | 2 |
| Corner radius | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
| ISO code indexable insert | VBMW 160408 | DCMW 070208 | VCMW 160408 | DCGW 070208 | VBGW 160408 | VCGW 160408 |
| Cutting edge version | M | M | M | G | G | G |
| Cutting conditions | continuous | continuous | continuous | continuous; heavily interrupted; slightly interrupted | continuous; heavily interrupted; slightly interrupted | continuous; heavily interrupted; slightly interrupted |
| Grade | BUX220 | BUX220 | BUX220 | BU7220 | BU7220 | BU7220 |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |