{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill MTC short, Weldon shank, ⌀ D / number of teeth Z: 16/4mm
Article no.: 215605 16/4
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 20 mm | |
| Overall length Ltot | 75 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| ⌀ D3 | 14 mm | |
| Circular interpolation milling ⌀ Dmin | 30 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Circular interpolation milling ap | 0.9 mm | |
| Ramping angle αmax | 0.89 degrees | |
| Ramping length L for αmax | 12.85 mm | |
| suitable indexable insert | AP.. 0602.. | |
| Pack of insert screws | 219827 (6IP; 0.45 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215605 16/4 | |
| EAN / GTIN | 4045197409577 | |
| Manufacturer number | 215605 16/4 |
Description
Ausführung:
Präzisions-Eckfräser mit ungleicher Teilung für hohe Laufruhe, höchste Präzision und Schneidleistung. Neue Generation der Hochleistungs-Wendeplatten-Eckfräser mit schnittkraftreduzierter Geometrie für den MTC-Einsatz bei instabilen Verhältnissen oder für Spindeln mit geringer Antriebsleistung.
Verwendung:
Zum Eckfräsen mit großen Tiefen, auch ins Volle. Universeller Einsatz in allen Stahlwerkstoffen, sowie rost- und säurefesten Stählen.
Ersatzteil:
Wendeplattenschrauben-Set Nr. 219827 (6IP; 0,45 Nm).
Hinweis:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut 90° shoulder mill MTC short, Weldon shank, ⌀ D / number of teeth Z: 16/4mm |
on request
In stock
23 pieces in stock
342,16 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling; Ramping; End milling | Zirkularfräsen; Ramping; Eckfräsen |
| Overall length Ltot | 75 mm | 90 mm |
| Through-coolant | yes | ja |
| Shank type | Weldon shank | Zylinderschaft |
| ⌀ D3 | 14 mm | 14 mm |
| Circular interpolation milling ⌀ Dmin | 30 mm | 30 mm |
| Circular interpolation milling ⌀ Dmax | 30 mm | 30 mm |