{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | TOHX 090204 N | |
Corner radius | 0.4 mm | |
Grade | P25M | |
Tool material | Carbide | |
Main application | P | |
Secondary application | M | |
Cutting conditions | slightly interrupted | |
Rake | 0 degrees | |
Cutting depth ap | 0.5 mm - 1.5 mm | |
Feed f | 0.1 mm/rev. - 0.3 mm/rev. | |
Cutting speed vc main application | 120 m/min - 300 m/min | |
Cutting speed vc secondary application | 120 m/min - 180 m/min | |
Coating | coated | |
Number of changes/inserts | 3 | |
Finishing/roughing assignment | Finishing | |
Type of product | Indexable insert for turning |
Article number | 268887 P25M | |
EAN / GTIN | 4047109036826 | |
Manufacturer number | W30 14660.0403 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
TOHX 090204 neutral, W30, Type: P25M
on request
In stock
435 pieces in stock
from
1
Pieces
€23.53
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€19.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
745 pieces in stock
from
1
Pieces
€10.90
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€9.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,476 pieces in stock
from
1
Pieces
€13.80
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€11.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
676 pieces in stock
€6.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,112 pieces in stock
€8.57
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of changes/inserts | 3 | 3 | 3 | 3 | 3 |
Corner radius | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm |
ISO code indexable insert | TOHX 090204 N | TCMT 110204 | TCMT 16T304 | TCMT 110204 | TCMT 16T304 |
Tool material | Carbide | Carbide | Carbide | Carbide | Carbide |
Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
Cutting depth ap | 0.5 mm - 1.5 mm | 0.5 mm - 2.5 mm | 0.5 mm - 2.5 mm | 0.5 mm - 2.5 mm | 0.5 mm - 2.5 mm |
Feed f | 0.1 mm/rev. - 0.3 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. | 0.12 mm/rev. - 0.3 mm/rev. | 0.12 mm/rev. - 0.3 mm/rev. |