{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ER clamping nut for HiRunER collet chucks, for ER: 25
Article no.: 309617 25
Article code:
- Standard: DIN 6499 D
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
Product details
Technical Data
| for ER | 25 mm | |
| Standard | DIN 6499 D | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Overall length L | 24 mm | |
| External ⌀ D | 44 mm | |
| Thread | M34×1.5 | |
| maximum tightening torque | 101 Nm | |
| Type of product | Clamping nut |
Identification numbers & Classifications
| Article number | 309617 25 | |
| EAN / GTIN | 4045197771759 | |
| Manufacturer number | 309617 25 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
Surface smoothly coated, ball-bearing mounted. Low coefficient of friction, high clamping forces.
Surface smoothly coated, ball-bearing mounted. Low coefficient of friction, high clamping forces.
With slots.
Suitable for:
HiRunER precision ER collet chuck No. 300642; 300643; 300647; 302839; 302843; 302844; 305523; 305524; 305532.
Optional extras:
Note:
Collet chuck and clamping nut are balanced separately!
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
ER clamping nut for HiRunER collet chucks, for ER: 25 |
|||||
| External ⌀ D | 44 mm | 42 mm | 42 mm | 42 mm | 32 mm |
| for ER | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Overall length L | 24 mm | 21 mm | 21 mm | 20.5 mm | 14.5 mm |
| Thread | M34×1.5 | M32×1.5 | M32×1.5 | M32×1.5 | M32×1.5 |
| Standard | DIN 6499 D | DIN 6499 D | DIN 6499 D | DIN 6499 D | DIN 6499 D |
| Type of product | Clamping nut | Clamping nut | Clamping nut | Clamping nut | Clamping nut |