{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 40 mm | |
Number of cutting edges Z | 3 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 16 mm | |
Overall length Ltot | 45 mm | |
Mounting bore ⌀ | 16 mm | |
⌀ D3 | 24 mm | |
Circular interpolation milling ⌀ Dmin | 64 mm | |
Circular interpolation milling ⌀ Dmax | 78 mm | |
Circular interpolation milling ap | 4 mm | |
Ramping angle αmax | 4.69 degrees | |
Ramping length L for αmax | 30.5 mm | |
suitable indexable insert | ZD.. 16M5 | |
Insert screw | 229900 (TP20; 6.0 Nm) | |
Type of product | End / face mill |
Article number | 220803 40/3 | |
EAN / GTIN | 2050002058255 | |
Manufacturer number | 5673490 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() Shoulder mill 90° 5720VZ16 40/3 mm |
||||
Mounting bore ⌀ | 16 mm | 16 mm | 16 mm | 16 mm |
Milling application | Circular milling; Ramping; End milling | End milling | Corner milling; Circular milling; Ramping | Ramping; Circular milling; Plunging |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | ZD.. 16M5 | SO.. 1205.. | AP.. 1805.. | ZDHT 1505 |
Shank type | with bore | with bore | with bore | with bore |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill |