{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill set HSS-E No. 113001 with case, uncoated, Type: 1-10
Article no.: 113010 1-10
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Drill range | 1 mm - 10 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Shank | Three drive flats shank; Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Number of drills | 19 | |
| Incremental steps of drills | 0.5 mm | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113010 1-10 | |
| EAN / GTIN | 4045197765338 | |
| Manufacturer number | 113010 1-10 |
Application Table
N
70
N
45
N
40
P
40
P
30
P
25
P
10
P
8
M
12
M
8
K
25
N
80
Description
Version:
Stable and sturdy stub drill with strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
Composed of jobber drills DIN 1897.
Composed of jobber drills DIN 1897.
Note:
⌀ 1 - 3.5 mm: Drills with plain shank, without drive flats.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Stub drill set HSS-E No. 113001 with case, uncoated, Type: 1-10 |
|||||||||
| Number of drills | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 |
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | uncoated | TiN | uncoated | TiN | TiN | uncoated | uncoated | uncoated | uncoated |
| Incremental steps of drills | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
| Colour ring | without | without | yellow | without | without | red | red | without | without |
| Shank | Three drive flats shank; Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank |
| Point angle | 130 degrees | 130 degrees | 130 degrees | 118 degrees | 118 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees |