{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 16 mm | |
Overhang L1 | 75 mm | |
Overall length Ltot | 131 mm | |
Shank ⌀ Ds h6 | 25 mm | |
⌀ D3 | 9 mm | |
Circular interpolation milling ⌀ Dmin | 34 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Circular interpolation milling ap | 4 mm | |
Ramping angle αmax | 9.17 degrees | |
Ramping length L for αmax | 15.5 mm | |
suitable indexable insert | ZD.. 16M5 | |
Insert screw | 229900 (TP20; 6.0 Nm) | |
Type of product | End / face mill |
Article number | 220800 25/2 | |
EAN / GTIN | 4059782502024 | |
Manufacturer number | 5672892 |
This article |
Recommendations |
|||
---|---|---|---|---|
Shoulder mill 90° 5720VZ16, Plain shank, ⌀ D / number of teeth Z: 25/2mm |
||||
Overhang L1 | 75 mm | 31 mm | 44 mm | 44 mm |
Overall length Ltot | 131 mm | 105 mm | 100 mm | 100 mm |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | ZD.. 16M5 | SOMT 09T304 | AP.. 1805.. | AP.. 16.. |
Shank type | Plain shank | Weldon shank | Weldon shank | Weldon shank |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill |