{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNGA 150604, BU7220, Cutting edge version: G
Article no.: 255445 G
Article code:
Product details
Technical Data
| ISO code indexable insert | DNGA 150604 | |
| Corner radius | 0,4 mm | |
| Grade | BU7220 | |
| Tool material | CBN | |
| Cutting conditions | continuous; heavily interrupted; slightly interrupted | |
| Cutting edge version | G | |
| Cutting depth ap | 0,05 mm - 0,2 mm | |
| Feed f | 0,05 mm/rev. - 0,15 mm/rev. | |
| Cutting speed vc main application | 90 m/min - 140 m/min | |
| Number of changes/inserts | 2 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 255445 G | |
| EAN / GTIN | 4045197895288 | |
| Manufacturer number | 255445 G |
Application Table
H
H
H
Description
Version:
Fitted with 2 cutters.
Description:
New type of CBN with a balanced combination wear-resistance and tensile strength for general-purpose use in hardened steel up to 67 HRC in combination with a special constitution. For use both in continuous cutting and also in slightly interrupted and heavily interrupted cutting.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
DNGA 150604, BU7220, Cutting edge version: G
on request
In stock
139 pieces in stock
69,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
28,18 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner radius | 0,4 mm | 0,4 mm |
| ISO code indexable insert | DNGA 150604 | DNMA 150604 |
| Finishing/roughing assignment | Finishing | Finishing |
| Cutting edge version | G | M |
| Cutting conditions | continuous; heavily interrupted; slightly interrupted | continuous |
| Feed f | 0,05 mm/rev. - 0,15 mm/rev. | 0,1 mm/rev. - 0,2 mm/rev. |
| Cutting speed vc main application | 90 m/min - 140 m/min | 80 m/min - 200 m/min |