{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 8 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Milling profile | WR | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 19 mm | |
Overhang length L1 incl. recess | 25 mm | |
Recess ⌀ D1 | 7,5 mm | |
Overall length L | 63 mm | |
Shank ⌀ Ds | 8 mm | |
Corner rounding rv | 0,2 mm | |
Feed fz for slot milling in short-chipping aluminium | 0,1 mm | |
Feed fz for side milling in short-chipping aluminium | 0,12 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205260 8 | |
EAN / GTIN | 4062406122461 | |
Manufacturer number | 205260 8 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 8mm
on request
In stock
52 pieces in stock
50,26 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
91,77 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
95 pieces in stock
86,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
201 pieces in stock
104,42 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
407 pieces in stock
76,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
135 pieces in stock
91,31 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | TiAlN | TiAlN | DLC | DLC | DLC |
Recess ⌀ D1 | 7,5 mm | 7,7 mm | 7,7 mm | 7,5 mm | 7,8 mm | 7,8 mm |
Through-coolant | no | no | no | no | no | no |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Helix angle | 45 degrees | 40 degrees | 40 degrees | 35 degrees | 42 degrees | 42 degrees |
Tolerance nominal ⌀ | e8 | e8 | e8 | e8 | e8 | e8 |
No. of teeth Z | 3 | 5 | 4 | 3 | 3 | 3 |