{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill HPC / TPC ZOX 12 mm GARANT
Article no.: 202549 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | ZOX | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 36 mm | |
| Overhang length L1 incl. recess | 46 mm | |
| Recess ⌀ D1 | 11 mm | |
| Overall length L | 93 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0,2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0,1 mm | |
| Feed fz for side milling in short-chipping aluminium | 0,12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202549 12 | |
| EAN / GTIN | 4045197454287 | |
| Manufacturer number | 202549 12 |
Application Table
N
500
N
480
N
240
N
260
N
240
N
Description
Version:
Sturdy roughing slot drills without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide end mill HPC / TPC ZOX 12 mm GARANT
on request
In stock
99 pieces in stock
234,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
80 pieces in stock
215,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
241,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Recess ⌀ D1 | 11 mm | 11 mm | 11 mm |
| Overall length L | 93 mm | 93 mm | 93 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 degrees | 45 degrees | 45 degrees |
| Machining strategy | HPC | MTC; TPC | HPC |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |