{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 6 mm | |
Coating | TiAlN | |
Tool material | HSS PM | |
Standard | DIN 844 | |
Milling profile | HR | |
Tolerance nominal ⌀ | ±0.12 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 13 mm | |
Overhang length L1 incl. recess | 20 mm | |
Recess ⌀ D1 | 5,5 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0,3 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0,008 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 192860 6 | |
EAN / GTIN | 4045197108357 | |
Manufacturer number | 192860 6 |
This article |
Recommendations |
|||
---|---|---|---|---|
Roughing end mill HSS-PM green ring TiAlN 6 mm GARANT
on request
In stock
92 pieces in stock
50,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
204 pieces in stock
48,88 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
152 pieces in stock
47,84 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
46,35 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | TiAlN | TiAlN | TiAlN |
Flute length Lc | 13 mm | 13 mm | 13 mm | 13 mm |
Helix angle | 30 degrees | 25 degrees | 30 degrees | 50 degrees |
No. of teeth Z | 4 | 3 | 4 | 4 |
Corner chamfer width at 45° | 0,3 mm | 0,3 mm | 0,3 mm | 0,2 mm |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill |