{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 10 mm GARANT
Article no.: 192600 10
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0,5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,014 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192600 10 | |
| EAN / GTIN | 4045197106971 | |
| Manufacturer number | 192600 10 |
Application Table
N
83
P
30
P
25
P
25
P
12
K
23
Description
Version:
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
Up to size 20 end cutting teeth profile for plunging.
Up to size 20 end cutting teeth profile for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill HSS-Co8 10 mm GARANT
on request
In stock
138 pieces in stock
26,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
45,31 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
43,47 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
83 pieces in stock
45,66 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1.194 pieces in stock
42,44 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | TiAlN | TiAlN |
| Colour ring | without | without | without | without | without |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,014 mm | 0,03 mm | 0,025 mm | 0,025 mm | 0,014 mm |
| Corner chamfer width at 45° | 0,5 mm | 0,3 mm | 0,4 mm | 0,4 mm | 0,5 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |