{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | FeedKing | |
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Ramping; Plunging | |
Spacing of the cutters | unequal spacing | |
Machining strategy | HPC | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
⌀ D1 h6 | 12,5 mm | |
⌀ D2 | 20,7 mm | |
⌀ D3 | 9 mm | |
maximum cutting depth ap max | 1,15 mm | |
Overall length Ltot | 35 mm | |
Mounting thread M | M12 | |
Circular interpolation milling ⌀ Dmin | 34 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Circular interpolation milling ap | 1,15 mm | |
Ramping angle αmax | 2,02 degrees | |
Ramping length L for αmax | 8,5 mm | |
suitable indexable insert | XD.. 09T308 | |
Pack of insert screws | 219933 (15IP; 3.8 Nm) | |
Type of product | Copy mill |
Article number | 212905 25/2 | |
EAN / GTIN | 4045197320865 | |
Manufacturer number | 212905 25/2 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Feedking high feed rate indexable end mill with threaded shank 25/2 mm GARANT
on request
In stock
11 pieces in stock
299,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
233,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
264,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 |
Mounting thread M | M12 | M12 | M12 |
Overall length Ltot | 35 mm | 36 mm | 36 mm |
Shank type | with threaded shank | with threaded shank | with threaded shank |
Circular interpolation milling ⌀ Dmin | 34 mm | 38 mm | 40 mm |
Ramping angle αmax | 2,02 degrees | 3,29 degrees | 2,74 degrees |
Type of product | Copy mill | Copy mill | Copy mill |