{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Gap punch set with manual hydraulic device, Type: 1
Article no.: 834855 1
Article code:
Product details
Technical Data
| Case length | 495 mm | |
| Case width | 385 mm | |
| Case height | 140 mm | |
| Type of product | Punching tool |
Identification & Classification
| Article number | 834855 1 | |
| EAN / GTIN | 4045197967176 | |
| Manufacturer number | 834855 1 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Supplied with:
1 manual hydraulic device No. 834655.
1 each gap sheet metal punch (similar to No. 834160 but without ball thrust bearings) ⌀ 16.2 (M16); 20.4 (PG13 / M20); 22.5 (PG16 / M22); 25.4 (M25); 32.5 (M32); 40.4 (M40).
1 each draw bolt 3/4 inch − UNF / M10×1 or 3/4 inch − UNF / M16×1.5 with spacer washer.
1 plastic case, size 495×385×140 mm.
1 each gap sheet metal punch (similar to No. 834160 but without ball thrust bearings) ⌀ 16.2 (M16); 20.4 (PG13 / M20); 22.5 (PG16 / M22); 25.4 (M25); 32.5 (M32); 40.4 (M40).
1 each draw bolt 3/4 inch − UNF / M10×1 or 3/4 inch − UNF / M16×1.5 with spacer washer.
1 plastic case, size 495×385×140 mm.
Warning:
Intended use
Reasonably foreseeable misuse
- The manual hydraulic drive is intended for punching burr-free round, square and rectangular holes in sheet metal.
- The drive is suitable for manufacturing control cabinets and system building.
- Use only when it is technically in good condition and safe to operate.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not subject it to blows, impacts or heavy loads.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Do not exceed the maximum force at the handle and do not exceed the pressure rating of the tool.
- Do not attach any extensions or bypass adaptors to the handle.