{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 6 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Milling profile | HR | |
Tolerance nominal ⌀ | d11 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | no | |
Machining strategy | MTC | |
Flute length Lc | 8 mm | |
Overall length L | 54 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0.15 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.028 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.03 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 205710 6 | |
EAN / GTIN | 4045197358189 | |
Manufacturer number | 205710 6 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide roughing end mill MTC, TiAlN, ⌀ d11 DC: 6mm
on request
In stock
48 pieces in stock
£72.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
£39.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
189 pieces in stock
£20.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5,501 pieces in stock
£18.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
163 pieces in stock
£34.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
70 pieces in stock
£56.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
402 pieces in stock
30.48 £
£18.40
plus VAT at the current rate
Prices plus delivery costs
|
|
Overall length L | 54 mm | 54 mm | 54 mm | 54 mm | 54 mm | 54 mm | 54 mm |
Through-coolant | no | no | no | no | no | no | no |
Feed fz for side milling in steel < 900 N/mm2 | 0.03 mm | 0.05 mm | 0.05 mm | 0.05 mm | 0.05 mm | 0.05 mm | 0.03 mm |
Feed fz for slot milling in steel < 900 N/mm2 | 0.028 mm | 0.04 mm | 0.04 mm | 0.04 mm | 0.04 mm | 0.04 mm | 0.028 mm |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Corner chamfer width at 45° | 0.15 mm | 0.12 mm | 0.1 mm | 0.2 mm | 0.12 mm | 0.3 mm | 0.3 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |