{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® indexable drill Combination shank, 2×D, ⌀ DC m7: 15,5mm
Article no.: 235500 15,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 15.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 32 mm | |
| Overhang LA | 56 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| ISO code indexable insert | SOEX 050204 13-.. | |
| Pack of insert screws | 239652 6IP1 (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 106 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235500 15,5 | |
| EAN / GTIN | 4047109047105 | |
| Manufacturer number | U10 11550 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
KOMET KUB Quatron® indexable drill Combination shank, 2×D, ⌀ DC m7: 15,5mm
on request
In stock
2 pieces in stock
352.36 £
£141.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
£282.61
plus VAT at the current rate
Prices plus delivery costs
|
|
| Drill depth for indexable insert drill up to | 2×D | 2×D |
| Through-coolant | yes | yes |
| Nominal ⌀ D | 15.5 | 15.5 |
| Shank ⌀ Ds | 20 mm | 20 mm |
| Pack of insert screws | 239652 6IP1 (0.6 Nm) | 239700 5IP (0.38 Nm) |
| Series | KUB Quatron® | Power Drill |
| Overhang LA | 56 mm | 48 mm |