{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Foret htes perf. carb/ mono., queue cylindrique DIN 6535 HA 6,2 mm
Réf.: 123106 6,2
Référence:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Détails du produit
Caractéristiques techniques
| Nominal ⌀ DC | 6.2 mm | |
| Coating | TiN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 66.7 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Flute length Lc | 76 mm | |
| Overall length L | 114 mm | |
| Shank ⌀ Ds | 8 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 1100 N/mm2 | 0.15 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Numéros d’identification et classifications
| Référence article | 123106 6,2 | |
| EAN / GTIN | 4045197447852 | |
| Réf. fabricant | 123106 6,2 |
Tableau d’application
N
175
N
135
P
105
P
85
P
75
P
45
P
30
M
35
M
30
K
65
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
Note:
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Foret htes perf. carb/ mono., queue cylindrique DIN 6535 HA 6,2 mm
Sur demande
Disponibilité
28 article(s) en stock
184,92 €
+ TVA en vigueur
Prix et frais de livraison
|
|||||
| Coating | TiN | TiAlN | DLC | TiAlN | TiAlN |
| Colour ring | green | blue | yellow | green | green |
| Overall length L | 114 mm | 114 mm | 114 mm | 114 mm | 114 mm |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Tool material | Solid carbide | Solid carbide | solid carbide | Solid carbide | Solid carbide |
| Point angle | 135 degrees | 140 degrees | 135 degrees | 135 degrees | 135 degrees |
| recommended maximum drilling depth L2 | 66.7 mm | 66.7 mm | 66.7 mm | 66.7 mm | 66.7 mm |