{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | VNMG 160408 | |
Corner radius | 0.8 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS (brass) | |
Cutting depth ap | 0.75 mm - 2.5 mm | |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 4 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 251824 CA6525 | |
EAN / GTIN | 4960664472161 | |
Manufacturer number | TJV07632 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() VNMG 160408 CA6525
on request
In stock
91 pieces in stock
€21.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
776 pieces in stock
from
1
Pieces
€16.35
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€13.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
515 pieces in stock
€10.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
563 pieces in stock
from
1
Pieces
€16.63
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€13.86
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner radius | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
Finishing/roughing assignment | Semi-roughing | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Finishing |
Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
Cutting depth ap | 0.75 mm - 2.5 mm | 0.5 mm - 4 mm | 0.5 mm - 4 mm | 0.5 mm - 4 mm |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. | 0.12 mm/rev. - 0.45 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. |
Main application | M | M | M | M |
Cutting speed vc main application | 60 m/min - 220 m/min | 60 m/min - 230 m/min | 50 m/min - 200 m/min | 70 m/min - 240 m/min |