This article is no longer part of the assortment. If you are looking for an alternative, please note the links or get in contact with us.

Alternative article:

Machine tap HSS-E, TiCN, MF: 5X0,5

Article no.: 136270 5X0,5

MF:

Thread size		M5×0.5
Coating		TiCN
Thread type		MF
Flank angle		60 degrees
Tool material		HSS E
Standard		DIN 374
Thread standard		DIN 13
Tolerance class		ISO 2 6H
Taper lead form		C
Helix angle		40 degrees
Shank		Plain shank with h9
Through-coolant		no
Application for type of drilling		up to 2×D for blind holes
Cutting direction		right-hand
Thread pitch		0.5 mm
Overall length L		70 mm
Shank ⌀ D_s		3.5 mm
Shank square □		2.7 mm
Tapping hole ⌀		4.5 mm
Thread ⌀		5 mm
Type of threading tool		Machine tap for dynamic machining
Number of clamping slots		3
Colour ring		red
Number of cutting edges Z		3
Thread depth		10 mm
Type of product		Tap

Article number		136270 5X0,5
Manufacturer number		136270 5X0,5

For use with emulsion (fat content minimum 8%).

For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3 mm larger.

	This article	Recommendations
	Machine tap HSS-E, TiCN, MF: 5X0,5	Machine tap, nitrided, MF: 5X0,5 on request In stock 33 pieces in stock €25.53 plus VAT at the current rate Prices plus delivery costs	GARANT Master Tap machine tap HSS-E-PM 6HX, AlTiX, MF: 5X0,5 on request In stock 96 pieces in stock €52.67 plus VAT at the current rate Prices plus delivery costs	HOLEX Pro Tap machine tap HSS-E 6H, TiN, MF: 5X0,5 on request Subsequent delivery 0 pieces in stock €18.98 plus VAT at the current rate Prices plus delivery costs
Type of threading tool	Machine tap for dynamic machining	Machine tap for dynamic machining	Machine tap for dynamic machining	Machine tap for dynamic machining
Coating	TiCN	nitrided	AlTiX	TiN
Thread pitch	0.5 mm	0.5 mm	0.5 mm	0.5 mm
Tapping hole ⌀	4.5 mm	4.5 mm	4.5 mm	4.5 mm
Shank square □	2.7 mm	2.7 mm	2.7 mm	2.7 mm
Thread depth	10 mm	15 mm	12.5 mm	12.5 mm
Shank ⌀ D_s	3.5 mm	3.5 mm	3.5 mm	3.5 mm