{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM, TiAlN, ⌀ js14 DC: 14mm
Article no.: 192541 14
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 53 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.7 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.055 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192541 14 | |
| EAN / GTIN | 4045197547552 | |
| Manufacturer number | 192541 14 |
Application Table
N
138
M
23
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
For the most demanding metal removal rates.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill HSS-PM, TiAlN, ⌀ js14 DC: 14mm
on request
In stock
13 pieces in stock
106,72 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
84,87 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
86,48 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
83,49 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
81,42 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling profile | WR | NF | NF | WR | NR |
| Overall length L | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 53 mm | 53 mm | 55 mm | 53 mm | 53 mm |
| Helix angle | 36 degrees | 25 degrees | 30 degrees | 36 degrees | 30 degrees |
| No. of teeth Z | 3 | 3 | 4 | 3 | 4 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |