{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 16 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Milling profile | WR | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 35 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 31 mm | |
Overhang length L1 incl. recess | 42 mm | |
Recess ⌀ D1 | 15 mm | |
Overall length L | 92 mm | |
Shank ⌀ Ds | 16 mm | |
Corner rounding rv | 0.32 mm | |
Feed fz for slot milling in short-chipping aluminium | 0.2 mm | |
Feed fz for side milling in short-chipping aluminium | 0.22 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205250 16 | |
EAN / GTIN | 4062406122263 | |
Manufacturer number | 205250 16 |
This article |
Recommendations |
|||
---|---|---|---|---|
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 16 mm
on request
In stock
70 pieces in stock
BGN 517.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
BGN 307.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
BGN 512.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
BGN 616.27
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang length L1 incl. recess | 42 mm | 42 mm | 42 mm | 58 mm |
Colour ring | yellow | yellow | yellow | yellow |
Overall length L | 92 mm | 92 mm | 92 mm | 108 mm |
Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm |
No. of teeth Z | 4 | 3 | 3 | 3 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 16 mm | 16 mm | 16 mm | 16 mm |