{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 10 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Milling profile | WR | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 35 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 30 mm | |
Recess ⌀ D1 | 9.5 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner rounding rv | 0.32 mm | |
Feed fz for slot milling in short-chipping aluminium | 0.12 mm | |
Feed fz for side milling in short-chipping aluminium | 0.14 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205250 10 | |
EAN / GTIN | 4062406122232 | |
Manufacturer number | 205250 10 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 10 mm
on request
In stock
206 pieces in stock
BGN 251.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
BGN 272.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
BGN 221.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
143 pieces in stock
BGN 148.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
231 pieces in stock
BGN 207.82
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.3×D for side milling; 0,08×D | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Recess ⌀ D1 | 9.5 mm | 9.7 mm | 9.7 mm | 9.5 mm | 9.8 mm |
Overall length L | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
Flute length Lc | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
No. of teeth Z | 3 | 5 | 4 | 3 | 3 |